Treatex^® Hardwax Oil Traditional

Treatex^® Hardwax Oil Traditional preserves and enhances the appearance of all types of internal wood such as flooring, worktops, stairs, furniture, and internal joinery. Treatex^® Hardwax Oil Traditional is manufactured on a base of natural sustainable raw materials including: linseed oil, sunflower oil, jojoba oil, beeswax, carnauba wax and candelilla wax. Available in clear matt, satin, gloss and in a range of colours.

• Contains no pollutants and very few solvents.
• Odourless.
• Very durable.
• Quick drying.
• Two coats in just 3 - 6 hours.
• No sanding required between coats.
• Microporous or closed surface possible depending on application quantity.
• Recommended for those with dust allergies; dirt and dust can be removed easily.
• Easy to clean with Treatex^® Floor Care.
• Easy to maintain with Treatex^® Wax Polish.
• Certified safe for use on children’s toys: DIN EN 71-3.
• Complies with regulation DIN 68861-1B: Resistance to substances such as wine, beer, coffee, tea, fizzy drinks etc.
• Complies with DIN 53160: Sweat and saliva proof.
• Certified for commercial use: DIN-51131, EN-13893.
• Meets with 2010 VOC emissions regulations.

Traditional Colours

Treatex^® Hardwax Oil is also available in the following range of colours:

One coat of Treatex^® Traditional Colours should be brushed on to unfinished timbers and any excess should be clothed off. Finish with two coats of Treatex^® Hardwax Oil Traditional Clear.

Hardener

Treatex^® hardener is a chemical additive that can be used in commercial locations to increase surface hardness by at least 10% by mixing 10% hardener to Treatex^® Hardwax oil. Can be used in both coats or just top coat if required.

Oily / Dense Timbers

Use Treatex^® Isoparaffin when treating oily/dense timbers like Ipe, Teak, Jarrah, Merbau etc. For the first coat mix approximately 10% Treatex^® Isoparaffin with Treatex^® Hardwax Oil Traditional.