Item No. 3160 (Clear) 3161 (Albino) 3164 (Sheer) 3167 (Champagne) 31610 (Dun) 31613 (Buckskin) 31619 (Spanish Chestnut) 31622 (Bay)
Sizes: 1 Litre, 2.5 Litres
- Easy to apply
- UV resistant
- Highly water resistant
- Contains no biocides or preservatives
- Safe for use on children's toys
- Can be used with Treatex Anti Slip Decking Oil
- SHEER is a lightly tinted clear finish with UV inhibitors
- Exterior Oil colours can be overcoated with Exterior Oils Clear for extra wear protection
- Exterior Oils can over be overcoated with Treatex Anti Slip Decking Oil
Suitable for: External use
Recommended timbers: Suitable for use on most species of timber
Applications: Decking, cladding, windows, garden structures and other exterior joinery
1L will cover approximately 15m² in one coat depending on the timber and method of application.
2.5L will cover approximately 37m² in one coat depending on the timber and method of application.
Treatex Exterior Oils are available in the following colours:
Colours shown are indicative and are only as accurate as web displays allow
Treatex Exterior Oils work best on unfinished timbers. Exotic and pressure treated timbers should be allowed to weather for approximately 3 months before finishing. Previous finishes which stop Exterior Oils penetrating into the timbers (e.g. paints and other ‘closed’ finishes) must be fully removed prior to application. Previous porous finishes should be lightly sanded before over coating. When over coating a previously finished surface, a trial application is essential. Flaking or peeling finishes must be fully removed prior to application. Ensure the timber is dry and free from possible contaminates e.g. algae, grease, dirt, dust etc. Timbers susceptible to mould and fungi should be treated first with a suitable preservative. We advise that when using Exterior Oils, sufficient product is purchased to complete the whole project and when more than one tin is required it is advisable to mix them together before use. The timber must have a moisture content below 18% and the ambient temperature must be greater than 8oC/<60% humidity during application and drying. We strongly recommend a trial application prior to starting the project.
Stir tins thoroughly, before and during use. Use a brush, roller or spray to evenly apply Treatex Exterior Oils in the same direction as the wood grain, allowing approximately 60-70ml per m2. Pay particular attention to the end grain, where you should apply liberally. After approximately 12 hours the first coat can be overcoated. Apply with a brush or roller a second coat of Exterior Oils, again allowing roughly 60-70ml per m2. After the second coat leave for approximately 12 hours to dry. A third coat can be applied if necessary. Finishing with Exterior Oils Clear will add further protection against wear and abrasion. For decking, we recommend applying Treatex Anti-slip Decking Oil.
Treatex brushes and rollers are available. Wet brushes and rollers can be cleaned with Treatex Thinner or white spirit. Store tins in a cool and frost free environment. Unopened tins will last for five years. Once tins are opened, transfer contents to a smaller airtight container.
Video - How to apply Treatex Exterior Oils
Check out the video below to see how to apply Treatex Exterior Oils