Treatex 1-litre Clear Matt Hardwax Oil Ultra tin

Treatex Hardwax Oil Ultra (Clear)

Treatex Hardwax Oil Ultra is our premium hardwax oil for wood floors, worktops, furniture, and more. Specially formulated for high-traffic areas, this hard wax oil finish provides a tough, water-resistant layer while enhancing the natural beauty of the timber. Whether you're an experienced professional or a first-time DIYer, Treatex Hardwax Oil Ultra makes achieving a stunning, long-lasting timber finish straightforward.

Key Features and Benefits:

● Provides a hard-wearing, water-resistant finish

● Enhances the natural grain and texture of wood

● Easy to apply with excellent coverage

● Ideal for use on floors, furniture, and other wooden surfaces

● Available in five sheen levels

Treatex Hardwax Oil Ultra offers superior durability, making it the ideal hardwax oil for wood in homes, commercial spaces, or any area with high foot traffic. Its quick-drying formula ensures minimal disruption, while the long-lasting protection keeps your wood looking its best for years to come. Whether you're finishing a newly installed floor or refreshing an existing surface, Treatex Hardwax Oil Ultra delivers professional results with ease.

As a versatile wax oil suitable for most interior timber types, it is the go-to choice for anyone seeking a reliable, easy-to-apply hard wax oil finish that delivers both protection and a beautifully natural appearance. To learn more, please get in touch with us today.

click here to purchase

- Has a “warming” effect on lighter coloured timbers (this can be prevented by first applying Treatex Hardwax Oil Ultra Soft White or Colour Tone Ultra Natural)
- Usually, no sanding is required between coats (the timber grain may sometimes raise, which can be solved by a light sanding)
- Withstands high temperatures
- Easy to maintain with Treatex Wax Polish
- Spot repairable
- Slip resistance test BS 7976-2PTV certified. Suitable for domestic, commercial and wet areas.
- Complies with regulation DIN 68861-1B: Resistance to spills of water, wine, beer, coffee, tea, fizzy drinks etc.
- Safe for use on children’s toys: DIN EN 71-3
- Meets with VOC emissions regulations
- Recommended for those with dust allergies; dirt and dust can be removed easily
- Contains no biocides, preservatives or carcinogens
- Slip resistance further increased with the addition of Treatex R12 Anti-Slip additive
- Easy to apply - buffed, brushed or rolled on
- Quick drying - usually dry within 3-6 hours - dry in 1 hour when buffed
- Low odour
- Water-resistant
- Very durable - further strengthened with Treatex hardener
- Easy to clean with Treatex Floor Care or Treatex Spray on Floor and Surface Cleaner
- Food safe: BS EN 1186-3:2002 Overall migration in Aqueous stimulant by total immersion
Suitable for: Internal use
Recommended timbers: All (dense/oily timbers may require Treatex Thinner). Has a warming effect on some timbers.
Applications: Floors, doors, stairs, worktops, woodturning, skirting, furniture, instruments etc.
Please Note!
Clear Hardwax Oil must always be used as the final coat when Colour Tones are applied*
Coverage
125ml will cover approximately 2.5m² in one coat / 1.2m² in two coats depending on the timber and method of application.
500ml will cover approximately 10m² in one coat / 6m² in two coats depending on the timber and method of application.
1L will cover approximately 20m² in one coat / 12m² in two coats depending on the timber and method of application.
2.5L will cover approximately 50m² in one coat / 30m² in two coats depending on the timber and method of application.
5L will cover approximately 100m² in one coat / 60m² in two coats depending in the timber and method of application.
1L will cover approximately 3 doors in two coats depending on the timber and method of application.
Preparation
Treatex Hardwax Oil Ultra works best on untreated timber but can be applied over a previous coating of hardwax oil if it is clean and suitable for treating. If in doubt about the type of finish, it is better to fully remove it. Sand the timber to 120 grit to provide best absorption. Do NOT wash the surface with white spirit etc. or water after sanding. All sawdust should be removed with a hoover or tack-cloth. Ensure that enough product has been purchased to complete the work as required. If applying to a floor with underfloor heating, make sure that the heating has been off long enough for the floor to cool (at least 24hrs) and don't switch on until the Hardwax Oil has dried sufficiently.
Application
Stir tin(s) thoroughly before applying. Evenly apply the first coat with a good quality brush (Treatex brushes are available) or a short pile micro fibre roller. Leave to dry for 3-6 hours; allowing sufficient ventilation to the room will ensure a reliable drying time. Once dry, apply a second coat and leave to dry. The surface should be fine for careful use after 8 hours. Furniture can be placed on floors after approximately 18 hours. Breathable covers e.g. cardboard, rugs etc. should not be placed down for 72 hours; non-breathable, vapour-proof coverings such as plastic sheeting should not be placed over the surface for at least 14 days.
- DO not apply the product too thickly as drying time will be significantly increased. The best conditions for drying are to raise the room temperature and increase the airflow using windows, a fan or opening a door.
- We stock great-quality Treatex brushes and rollers for use. Alternatively, use a high-quality microfibre roller or brush.
- Wrap a plastic bag around wet rollers and brushes to prevent them from drying out between coats.
- Treatex Thinners or white spirit are the best way to clean wet brushes and rollers.
Self combustion
- Treatex contains linseed oil just like other natural oil-based products. You should therefore empty the sawdust out of your mechanical sander before working with anything that has a freshly applied linseed oil-based product. This is because there is a small but possible risk of self-combustion.
After multiple requests, we have had Treatex Hardwax Oil Ultra tested for use with food and liquids. We are pleased to say we passed all tests, including some that were not even necessary.
Certificates obtained:
BS EN 1186-3:2002 Overall migration in Aqueous stimulant by total immersion
BS EN 1186-14:2002 Overall migration in 95% Ethanol and Iso-Octane substitute tests
BS EN 71-3:2013+A1:2013 Migration of heavy metal from toys and toy materials
All 3 certificates are available to view by clicking here
Also tested but not yet certifiable:
Formaldehyde release based on regulations 10/2011 EU
Chromium (VI) and Organic Tin
Both of these tests passed well within their required limits. Test results and certificates will be available in the near future.
Hardwax Oil Ultra (Clear) has been tested to the standard BS EN 13501‐1 and has passed with a result of Class Cfl‐s1, meaning it is flame retardant and is suitable for use in commercial flooring applications.
The certificate can be viewed by clicking here
Treatex Hardwax Oil Ultra (Clear) has been certified to the latest Child Safe standard, EN71-3:2019 -click hereto view certificate.
Treatex Hardwax Oil Ultra (Clear) has been certified to the latest Liquid Resistance standard, ASTM D1308-02 - Effect of Household Chemicals on Clear & Pigmented Coatings ref. Sect. 6.1.1 - Water, 6.1.13 Beverages with the best possible results -click hereto view certificate.
Item No. 210 (Flat Matt), 220 (Matt), 230 (Soft Satin), 235 (Bright Satin), 240 (Gloss)
Sizes: 125ml (b), 0.5L (d), 1L (e), 2.5L (h), 10L (p) (Gloss only comes in 1L and 2.5L)