Anti Slip Decking Protection
Treatex Anti-Slip Decking Oil is a high-performance, solvent-free, water-resistant finish designed to enhance safety and protect exterior wooden surfaces. Made from sustainable, natural oils including sunflower and soybean, this environmentally friendly formula is non-toxic and free from harmful biocides.
The oil contains a unique castor oil-based polymer that forms a slip-resistant surface, ensuring a safer outdoor environment for decking, steps, and walkways. This easy-to-apply oil penetrates deeply, preserving the natural beauty of your wood while providing long-lasting protection.
Ideal for both treated and untreated timbers, it covers approximately 17.5–25m² per 2.5L tin with two coats, offering optimal safety and durability for all outdoor surfaces.
-
Slip-Resistant: Formulated with a castor oil-based polymer, providing a durable, anti-slip surface for enhanced safety.
Environmentally Friendly: Made from natural, sustainable oils including sunflower and soybean. Solvent-free and contains no biocides or toxic chemicals.
Water-Resistant: Ideal for outdoor use, creating a protective barrier against water and moisture.
Suitable for All Decking Types: Works on both treated and untreated timbers, ensuring versatility in application.
Child-Safe: Safe for use around children's play areas and toys.
Long-Lasting Protection: The deep penetration formula offers enduring defence, keeping your decking looking beautiful and functional.
-
Suitable for: External use, especially on decking, steps, and wooden walkways exposed to foot traffic.
Timber Compatibility: Perfect for use on most species of treated and untreated timber, including softwood and hardwood decking.
Coverage:
● A 2.5L tin will cover approximately 17.5–25m² per coat depending on wood type (e.g., rough-sawn vs. planed timber).
For corrugated or textured timber surfaces, coverage may be reduced due to the increased surface area.
-
Preparation:
● Ensure the timber is clean and dry (free from contaminants such as dirt, algae, or grease).
● Check that the timber moisture content is below 18% and that the ambient temperature is above 8°C with less than 60% humidity.
● Mix multiple tins of oil together before use if applying to a large area.
Application:
Stir the oil thoroughly before and during use.
Apply using a brush or roller, using 100-165ml per m² for even coverage.
Allow the first coat to dry for 8–12 hours. Once dry, apply a second coat in the same way.
Allow the second coat to dry for 8–12 hours. Full drying and surface use can occur after 24 hours. Complete curing takes 10 days.
-
Use Treatex Brushes & Rollers: Specifically designed for use with Treatex products, ensuring an even, smooth finish.
Clean Tools: Wet brushes and rollers can be cleaned easily with soap and water for reuse.
Store Properly: Store unopened tins in a cool, frost-free environment. Once opened, transfer any remaining product to an airtight container to prevent contamination.
Trial Coat: Always test a small area first to ensure compatibility and desired finish.
-
Item No. 41100
Sizes: 2.5L (h)