Iroko Oil

• Safe for use on children's toys

• Not suitable for high tannin content timbers e.g. Oak

• Will not flake or peel

• Easy to apply

• UV resitant

• Highly water resistant

• Contains no biocides or toxic ingredients

Suitable for: internal and external use

Recommended timbers: Iroko, Yellow Balau, Karri, Massaranduba, Bangkirai and Ipe

Applications: Decking, garden furniture, cladding and other exterior joinery.

2.5L will cover approximately 50m² in one coat depending on timber and method of application. Old/dry/porous/rough sawn timbers will consume more product.

Preparation

Treatex Iroko Oil works best on unfinished timber. Previous finishes which stop Treatex Iroko Oil penetrating into the timber (e.g. paint and other ‘closed’ finishes) must be fully removed prior to application. Previous porous finishes should be lightly sanded before overcoating. When overcoating a previously finished surface, a trial application is essential. Flaking or peeling finishes must be fully removed prior to application. Ensure the timber is dry and free from possible contaminates e.g. algae, grease, dirt, dust etc. Timbers susceptible to decay, mould and fungi should be treated first with a suitable preservative. We advise that when using Treatex Iroko Oil, sufficient product is purchased to complete the whole project and when more than one tin is required it is advisable to mix them together before use. Timber must have a moisture content below 18%. Temperature must be between 8º𝖼 and 25º𝖼 during application and drying. We strongly recommend a trial application prior to starting the project.

Application

Stir tins thoroughly, before and during use. Use a brush or roller to evenly apply Treatex Iroko Oil in the same direction as the wood grain. Pay particular attention to end grain, on end grain apply liberally. If possible, treat all sides of the timber for the first coat. After approximately 12 hours the first coat can be overcoated. Apply with a brush or roller a second coat of Treatex Iroko Oil. After the second coat leave for approximately 12 hours to dry. Treatex Iroko Oil is not a surface building product.

Treatex brushes and rollers are available. Wet brushes and rollers can be cleaned with Treatex Thinner or white spirit. Store tins in a cool and frost free environment. Unopened tins will last for five years. Once tins are opened, transfer contents to a smaller airtight container. Horizontal surfaces should be regularly inspected due to environmental factors such as standing water.

Item No. 31290
Sizes: 500ml (d), 1L (e), 2.5L (h)