R12 Anti-Slip additive


Item No. 1145
Sizes: 50g (for 1L), 125g (for 2.5L)

Treatex R12 Anti-slip additive is designed to be added to Treatex Hardwax Oil Clear (Matt, Satin, Gloss) to increase the anti-slip level from R10 to R12. It's suitable for all wooden and cork flooring surfaces and is ideal for stairs, wet areas, ramps and doorways. It is available in preset measurements for 1L (50g) and 2.5L (125g). It is best used in the top coat but can be used in both. It is also worth noting that due to the increased resistance of the coating, the floors surface will be subject to accelerated wear. 

Hardener 0.05L.jpg


Item No. 1141
Sizes: 0.05 Litre, 0.125 Litres

Treatex Hardener can be used in one or both coats of Treatex Hardwax Oil Clear. Ideal for high traffic floors, Treatex Hardwax Oil Clear can be mixed in the ratio 20:1 (5%) to Treatex Hardener to increase the mechanical resistance of the finished surface. 

Adding Hardener to Hardwax Oil Clear starts a chemical reaction which can’t be stopped - the mixture remains usable for up to three hours.

Over the past nine years Treatex Hardwax Oil has been successfully used in cafes, restaurants, pubs, and even a nightclub. Our hardening additive has been used to produce a finish durable enough for some of Britain’s highest traffic floors such as Heathrow Terminal 5 and the Natural History Museum in London. We are thrilled that Treatex Hardwax Oil has been specified to provide a durable and attractive finish in an ever increasing number of retail outlets such as Apple stores, White Stuff shops and Selfridges in London, one of the UK’s biggest and busiest shops.


Item No. 1191
Sizes: 1 Litre

When treating oily or dense timbers e.g. Iroko, Ipe, Teak, Jarrah, Merbau etc. thin the first coat of Treatex Hardwax Oil Clear with 10% Treatex Thinner (Isoparaffin). This allows the Hardwax Oil to properly penetrate into these type of timbers.